K4-PRO low viscosity thermal paste is developed and produced by Computer Systems laboratories research department. This product was developed as part of C.S. Labs BGA rework research project with the support of Greece and European Union. This product is designed to reduce the chances of BGA component failure for reasons related to overheating.
On each application less than 0.2g of K4-PRO is needed so a 10g packet of K4-PRO should be enough for more than 50 applications!!!
Key features of K4-PRO:
K4-PRO is a high quality thermal paste designed for use on computer BGA components (GPU, CPU, etc).
K4-PRO is a very low viscosity thermal paste (especially when heated during the fist use). It will cover all the invisible gaps between the component and the heatsink without creating a film of paste like most low cost thermal pastes.
K4-PRO has thermal conductivity K> * (3 times higher than common thermal pastes that are used on computers and commercial electronics)
K4-PRO is applied very easily directly on the component and has no electrical conductivity. It can be heated up to 220 degrees (Celsius) and has a long operational life time (practically infinite)
K4-PRO is produced in EU (Thessaloniki, Greece) and can be shipped to your location worldwide very fast. We use a 4th day delivery service worldwide.
10 g Packet contains:
1 X 10g K4-PRO low viscosity / high thermal conductivity thermal paste in a syringe
500 g Packet contains:
1 X 500g K4-PRO low viscosity / high thermal conductivity thermal paste
You can see our application instructions videos here:
When you should replace the thermal paste / pads in your computer:
Thermal paste and thermal pads should be replaced every time that the heat sink is removed (for cleaning, upgrade or other maintenance). Replacing the thermal pads and the gummy thermal paste that is used by Apple on the memory chips is very important if the heat sink is removed because if you reuse the same thermal pads or paste the heat sink is impossible to fit perfectly again and the component will be overheated and will fail soon.
If your computer is overheated or turns off after a few hours of use. In this case the entire heatsink system must be cleaned immediately and all thermal paste and thermal pads must be replaced.
Price includes VAT 24%. If you are VAT registered in EU please contact us before purchasing and we will offer a quote without VAT. Greek business customers should provide their business info in order to issue a commercial invoice.K5-PRO is produced in EU (Greece) and will be shipped directly from our production center in Thessaloniki Greece.
* Computer Systems matterials science laboratory testing : Method using a comparative technique (P. Karydopoulos, P. Frantzis, N. Karagiannis MSAIJ 2014)